Imagine this: you fire up your Dolphin E10 robotic pool cleaner, expecting a sparkling clean pool, but it’s leaving streaks of dirt and algae. The culprit? Worn-out brushes. The Dolphin E10 replacement brush isn’t just a part; it’s the key to restoring your cleaner’s scrubbing power. This guide covers the top-rated replacement brushes from genuine Dolphin parts to reliable aftermarket options, helping you find the perfect fit for your pool and budget.
Pros
- Compatible with a wide range of Dolphin models
- Restores climbing ability and scrubbing performance
- Affordable replacement compared to buying new robot
- Two brushes included for complete replacement
- Easy installation with proper fit check
Cons
- Compatibility may vary by robot revision, so verification is required
- Does not include other parts like tracks or filters
- No customer reviews yet to confirm long-term durability
The BGD 6101641-R2 Grey Climbing Brushes are a replacement set designed for Dolphin robotic pool cleaners, specifically models like the M200, DX3, and DX4. They come as a two-pack to replace both front and rear brushes, restoring the robot's ability to scrub pool floors and climb walls effectively.
These brushes are engineered to rotate with the robot's movement, dislodging dirt and debris while maintaining traction on vertical surfaces. Users can expect a noticeable improvement in cleaning performance once worn brushes are replaced, making this a cost-effective maintenance solution.
Build quality appears solid with grey composite bristles that resist wear and water damage. The set includes two identical brushes, but buyers must verify the shape, length, and mounting configuration of their existing brushes to ensure compatibility, as similar-looking robots may use different assemblies.
One potential drawback is the lack of customer reviews, so real-world longevity is unconfirmed. Additionally, compatibility varies by robot revision, so double-checking your model number is essential before purchase.
Overall, the BGD 6101641-R2 brush set offers a reliable and affordable way to keep your Dolphin pool cleaner performing at its best. If you need to restore scrubbing and climbing function, this two-pack is a smart choice.
Pros
- Plug-and-play installation with no rewiring needed
- Broad compatibility with many Dolphin and Maytronics models
- Includes a long 50-foot power cord for flexible outlet placement
- Durable build with IP54 waterproof rating and thermal protection
- Restores cleaning performance of existing robotic pool cleaners
Cons
- Only compatible with manual on/off Dolphin models (no WiFi or smart features)
- Aftermarket brand (Sixcow) may not match OEM build quality over time
- No customer reviews yet, so long-term reliability is unverified
The Sixcow 99956034 Power Supply Replacement is a practical solution for owners of Dolphin robotic pool cleaners that use a basic manual on/off switch. It is designed to replace the original 99956034US-ASSY unit in models like the Active 10, E10, E20, Cayman, Echo, Encore, Escape, S50, Saturn, Solo, T15, Premium 10/20, and Prowler 910, among others. This power supply is intended for users who want to revive a worn-out cleaner without spending on a full replacement.
Key features include a straightforward plug-and-play design: you simply open the enclosure, unplug the old unit, and plug in the new one. No rewiring is required, making it accessible even for those with limited DIY experience. The package includes a 5898412LF black power cord that can extend up to 50 feet, giving you flexibility to position the power supply away from the pool. The technical specs (100-125VAC input, 120W output, IP54 waterproof rating) confirm its suitability for outdoor use.
Build quality is a highlight: the unit uses premium materials, a quality PCB, and an aluminum heat sink to dissipate heat efficiently. It also features thermal protection and anti-corrosion properties, which extend its lifespan in damp conditions. The included handle adds convenience for moving or hanging the unit. However, this is a basic power supply without WiFi or smart scheduling, so it only works with older Dolphin models that lack wireless connectivity.
Potential drawbacks are few but worth noting. As an aftermarket part, Sixcow's build may not feel as refined as the OEM unit, though early specifications suggest solid construction. The 0 customer reviews mean real-world durability is unproven, but the 12-month warranty provides some reassurance. Additionally, it only supports manual on/off cleaners; if your Dolphin model has WiFi, this unit will not be compatible.
Verdict: For owners of compatible Dolphin pool cleaners needing a replacement power supply, the Sixcow 99956034 offers a cost-effective and easy-to-install solution. Its robust build, included long cord, and waterproof design make it a strong choice to restore your cleaner to peak performance. If you are comfortable with a basic, no-frills power supply and value straightforward repair, this is a solid buy.
Buying Guide for Dolphin E10 Replacement Brushes
Compatibility and Fit
Not all brushes fit all Dolphin models. The Dolphin E10 uses a specific brush type: the 9983122-R1 active front grey brush, but some models also use the 6101641-R2 climbing brush. Always check your cleaner’s model and existing brush part number before purchasing. Using an incompatible brush can lead to poor cleaning or even damage. For models like the Dolphin Nautilus CC or Prowler, verify the brush configuration carefully. If you need a full brush assembly, check out our guide on robotic pool cleaner brush assembly.
Bristle Type and Material
Bristles come in different densities and materials, affecting scrubbing power and durability. Gray brushes are standard for most Dolphin models, offering a balance between gentle cleaning and effective debris removal. Some aftermarket options use denser synthetic bristles for tough grime. If your pool has plaster or pebble finish, choose softer bristles to avoid surface wear. For hard debris, consider brushes with stiffer bristles, like the robotic pool cleaner active brush options.
Genuine vs. Aftermarket Parts
Genuine Dolphin brushes (like the 9983122-R1 or 6101641-R2) are certified for perfect fit and performance. Aftermarket brushes from brands like BGD, Hosrivae, or sixcow can save money, but verify quality. Aftermarket brushes may use different materials that could affect climbing ability or longevity. If you value warranty protection and guaranteed compatibility, stick with genuine parts. For a broader selection of replacement parts, visit our Replacement Parts category.
Number of Brushes in a Pack
Replacement brush packs come in 2-brush or 4-brush sets. A 2-brush pack replaces the front and rear brushes (like the genuine 6101641-R2 set). A 4-brush pack, like the Hosrivae 6101656-R4, includes all four climbing brushes for models like the DX6 or M400. If your E10 uses a different brush configuration, buy the correct pack to save time and money. Always count your existing brushes before ordering.
Final Thoughts
Choosing the right Dolphin E10 replacement brush comes down to your specific cleaner model and cleaning needs. For a flawless, certified fit that guarantees peak performance, the Dolphin Genuine Replacement Part (9983122-R1) from MAYTRONICS remains our top pick for the E10, offering verified compatibility and reliable scrubbing. If you are looking to replace both front and rear climbing brushes for a broader range of Dolphin models, the genuine Dolphin Genuine Replacement Part (6101641-R2) is a great choice, ensuring your cleaner climbs walls effectively. No matter which you choose, replacing worn brushes is the best way to restore your robotic pool cleaner’s efficiency and keep your pool pristine.
Related Guides
- Best Pool Robot Replacement Brush for Algae in 2026
- Replacements for Sparkling Water in 2026
- 5 Top Replacement Tracks for Pool Robot in 2026
Frequently Asked Questions
How often should I replace my Dolphin E10 brushes?
For most pool owners, replacing brushes every 6 to 12 months ensures optimal cleaning performance. If you notice reduced scrubbing, algae streaks, or your cleaner slipping on walls, it is time to swap them out. Seasonal use in 2026 may require less frequent changes.
Can I use aftermarket brushes on my Dolphin E10?
Yes, many aftermarket brushes are compatible with the Dolphin E10, provided they match the part number (like 9983122-R1). Third-party options from brands like BGD or Hosrivae can offer cost savings, but check reviews and compatibility carefully. For peace of mind, genuine parts are always recommended.
What is the part number for the Dolphin E10 brush?
The primary brush part number for the Dolphin E10 is 9983122-R1 (active front grey brush). Some models also use the 6101641-R2 for climbing brushes. Always verify your current brush’s part number before ordering to ensure a perfect fit.
How do I install replacement brushes on my Dolphin E10?
Installation is tool-free. Simply turn off the cleaner, remove the worn brush by pulling it out from its mounting slot, and snap the new brush into place. Ensure it is fully seated for proper rotation and climbing traction. For detailed instructions, see our guide on robotic pool cleaner brush assembly.
