Your Dolphin M600 has been a reliable pool companion, but lately you notice it slipping on the walls, leaving streaks on the floor, or even stalling mid-climb. The culprit is often worn-out brushes. Over time, the bristles lose their stiffness and the foam rings compress, reducing traction and scrubbing power. Instead of replacing the entire cleaner, swapping in new replacement brushes for Dolphin M600 pool cleaner is a cost-effective fix that restores performance in minutes. In this guide, we review the top brush replacements, from rear dynamic brushes to climbing rings, so you can choose the right set for your cleaner.
Why Brush Replacement Matters for Your Dolphin M600
The brushes on your Dolphin M600 are the primary contact points with your pool surfaces. They scrub algae and dirt from the floor and walls while providing the traction needed to climb. When they wear down, the cleaner loses its grip, causing it to slide backward on vertical surfaces and miss spots. Replacing worn brushes is a simple DIY task that can dramatically improve cleaning efficiency. For similar maintenance tips, check out our guide on Dolphin Premier replacement brushes to see how brush care varies across models.
Top Replacement Brushes for Dolphin M600 Pool Cleaner: Comparison
To help you find the right replacement brushes for Dolphin M600 pool cleaner, we compared six top-rated options based on compatibility, material quality, and ease of installation. The list below includes rear brushes, climbing brush sets, and foam climbing rings, each designed to address specific wear patterns.
Pros
- Compatible with a wide range of Dolphin models
- Restores climbing ability and scrubbing performance
- Affordable replacement compared to buying new robot
- Two brushes included for complete replacement
- Easy installation with proper fit check
Cons
- Compatibility may vary by robot revision, so verification is required
- Does not include other parts like tracks or filters
- No customer reviews yet to confirm long-term durability
The BGD 6101641-R2 Grey Climbing Brushes are a replacement set designed for Dolphin robotic pool cleaners, specifically models like the M200, DX3, and DX4. They come as a two-pack to replace both front and rear brushes, restoring the robot's ability to scrub pool floors and climb walls effectively.
These brushes are engineered to rotate with the robot's movement, dislodging dirt and debris while maintaining traction on vertical surfaces. Users can expect a noticeable improvement in cleaning performance once worn brushes are replaced, making this a cost-effective maintenance solution.
Build quality appears solid with grey composite bristles that resist wear and water damage. The set includes two identical brushes, but buyers must verify the shape, length, and mounting configuration of their existing brushes to ensure compatibility, as similar-looking robots may use different assemblies.
One potential drawback is the lack of customer reviews, so real-world longevity is unconfirmed. Additionally, compatibility varies by robot revision, so double-checking your model number is essential before purchase.
Overall, the BGD 6101641-R2 brush set offers a reliable and affordable way to keep your Dolphin pool cleaner performing at its best. If you need to restore scrubbing and climbing function, this two-pack is a smart choice.
Pros
- Durable PVA material resists wear and maintains shape.
- Wide compatibility covers many popular Dolphin robot models.
- Cost-effective replacement versus buying a new cleaner.
- Simple to install with no modifications needed.
- Rings dry and shrink for storage, then rehydrate to soft state.
Cons
- Rings arrive dry and hard; must soak before use (this is normal).
- No included instructions for installation (though straightforward).
- May not fit all Dolphin models not listed; check measurements.
The ANTOBLE 4Pcs Climbing Rings Replacement set is designed specifically for Maytronics Dolphin robotic pool cleaners. It is an essential upgrade for any pool owner whose robot has lost its ability to climb walls due to worn out rings. This kit includes four rings, enough for a typical cleaner, and is compatible with a long list of models including the popular M200, M400, M500, M600, Nautilus, and many more.
The standout feature is the use of premium PVA material. Unlike some cheaper alternatives, these rings are built to last. They arrive in a dry, hard state but quickly soften after soaking in water, returning to their intended flexible form. This property also makes storage easy: simply let them dry out and they shrink down. In real world use, they provide excellent traction on pool walls and tile, ensuring consistent cleaning performance.
Build quality feels solid. The rings measure 3.62 inches in diameter and 1.02 inches thick, with a centered hole of 1.89 inches, matching factory specs. they slide onto the cleaner axles easily. One minor issue: the product has zero customer reviews yet, so long term duarbility is unproven. However, the material and dimensions suggest they will perform as expected.
no significant drawbacks beyond the need to soak before first use. There are no instructions included, but installation is straight forward: just replace the old rings with the new ones. Also check compatibility with your specific model: the list is extensive but not exhaustive.
Verdict: for the price, these replacement rings offer a cost effective fix for a common problem. They restore wall climbing ability and extend the life of your Dolphin cleaner. If you have one of the many compatible models, this set is a smart buy.
Key Buying Criteria for Dolphin M600 Brushes
Compatibility with Your Dolphin Model
Not all brushes fit every Dolphin model. The M600 uses a specific rear brush assembly with a connecting port that must match the rear wheel. Always verify that the brush set is designed for the M600 or the same brush system (e.g., M700, M550, Active 60). Some products list multiple compatible models, but double-check the connection type before ordering.
For example, the Pool Cleaner Rear Brushe Replacement Parts is explicitly compatible with M600, M700, M550, and others, but the manufacturer advises confirming the connecting port matches. Similarly, the BGD 6101641-R2 Grey Climbing Brushes fit a wide range of Dolphin models that use the 6101641-R2 brush configuration, including M200, DX3, DX4, and more.
Brush Material and Durability
The material of the brush bristles and the foam rings determines how long they last and how well they scrub. High-quality PVA foam, as used in the 4Pcs Climbing Rings Replacement, maintains elasticity even when dry, and can be rehydrated by soaking. For rear brushes, look for sturdy plastic or rubber blades that resist bending and wear. The Pool Cleaner Rear Brush Fit for Dol-phin M600 M700 boasts excellent elasticity and anti-slip properties, reducing replacement frequency.
Ease of Installation
Most brush replacements are designed for quick DIY installation. Some rear brushes, like the Doule King Replacement Rear Dynamic Brush, come with a screwdriver, simplifying the process. Others, such as the Pool Cleaner Rear Brushe Replacement Parts, require you to remove the old brush and its connecting port, but the integrated design prevents missing parts. Choose a product with clear instructions or a simple snap-in design if you prefer minimal hassle.
Final Thoughts
Replacing worn brushes on your Dolphin M600 is a smart maintenance step that keeps your pool sparkling clean without the cost of a new cleaner. For most users, the Pool Cleaner Rear Brushe Replacement Parts offers a perfect balance of compatibility and durability, while the 4Pcs Climbing Rings Replacement for Maytronics are ideal if your cleaner’s climbing wheels have lost their grip. Both options are easy to install and will restore your robot’s stability and scrubbing power.
Related Guides
- Best Pool Robot Replacement Brush for Algae in 2026
- Replacements for Sparkling Water in 2026
- 5 Top Replacement Tracks for Pool Robot in 2026
- Top Replacement Brushes for Aquabot Pool Cleaners in 2026
- Top Kokido Pool Cleaner Replacement Brushes for
- Top Replacement Brushes for Kokido Pool Cleaners
- Best Robotic Pool Cleaner Replacement Brushes: Top Picks for
Frequently Asked Questions
How often should I replace the brushes on my Dolphin M600?
Typically, you should inspect the brushes every 3 to 6 months, depending on pool usage and water conditions. If you notice reduced climbing ability, visible wear, or the cleaner leaving streaks, it’s time to replace them. For more detailed guidance, see our article on Dolphin Premier replacement brushes.
Can I use brushes from other Dolphin models on my M600?
Compatibility varies. Some brushes are designed for a specific brush system, like the 6101641-R2 used in many Dolphin models, but the M600 has its own rear brush assembly with a unique connecting port. Always check the product description for M600 compatibility or contact the seller for confirmation.
What is the difference between rear brushes and climbing brushes?
Rear brushes are the larger cylindrical brushes that scrub the floor and walls, while climbing brushes are smaller side brushes or rings that help the cleaner grip and climb vertical surfaces. Both are essential for full coverage. If your cleaner slips on walls, replacing the rear brush or the climbing rings may solve the issue.
Do I need to replace both front and rear brushes at the same time?
It’s recommended to replace worn brushes in pairs to maintain balanced cleaning and traction. However, if only one brush is damaged, you can replace just that one. For optimal performance, consider replacing all brushes at once, as they tend to wear at similar rates.
